| Author | Post |
|---|
KevG
Super Moderator
|
Posted: Sat Aug 9th, 2008 06:52 pm |
|
Has anyone tried it yet?
I normally order mine with the slots!
|
Tim
Member
| Joined: | Sun Jun 15th, 2008 |
| Location: | Southampton |
| Posts: | 24 |
| Mana: |    |
|
Posted: Sat Aug 9th, 2008 04:17 pm |
|
David wrote: Which department of VOSA do you send the ribbon to, is it the local office?
David
You have to send it to Siemens for a free replacement. Last edited on Sat Aug 9th, 2008 05:21 pm by KevG
|
KevG
Super Moderator
|
Posted: Thu Aug 7th, 2008 11:17 pm |
|
| Its all in Matters of testing this month I think
|
David
Banned
| Joined: | Mon May 26th, 2008 |
| Location: | |
| Posts: | 376 |
| Mana: | |
|
Posted: Thu Aug 7th, 2008 08:06 pm |
|
Which department of VOSA do you send the ribbon to, is it the local office?
David
|
KevG
Super Moderator
|
Posted: Thu Aug 7th, 2008 06:16 pm |
|
KevG wrote: scubaman10w wrote: I doubt if they will supply us with one we will have to buy it .They don't provide all other equipment except VTS device not even ribbon for the printer. the same with the handheld devices currently being tested for approval.
Hi Scubaman.
You're right there, however VOSA do supply the ribbon, You just send the used one back to them and they will send another FOC.
Kev
They now require your vts Number to be attatched to the old ribbon.
|
KevG
Super Moderator
|
Posted: Fri Jun 27th, 2008 08:30 pm |
|
scubaman10w wrote: I doubt if they will supply us with one we will have to buy it .They don't provide all other equipment except VTS device not even ribbon for the printer. the same with the handheld devices currently being tested for approval.
Hi Scubaman.
You're right there, however VOSA do supply the ribbon, You just send the used one back to them and they will send another FOC.
Kev
|
scubaman10w
Member
| Joined: | Sun Feb 24th, 2008 |
| Location: | |
| Posts: | 4 |
| Mana: | |
|
Posted: Fri Jun 27th, 2008 07:44 pm |
|
| I doubt if they will supply us with one we will have to buy it .They don't provide all other equipment except VTS device not even ribbon for the printer. the same with the handheld devices currently being tested for approval.
|
David
Banned
| Joined: | Mon May 26th, 2008 |
| Location: | |
| Posts: | 376 |
| Mana: | |
|
Posted: Fri Jun 27th, 2008 06:41 pm |
|
VOSA have been using these camera devices for some time, check their DVD's.
Costly I think for them to provide each test station with one,then maybe backups if failures occur?
David
|
paperchase1968
Member
| Joined: | Thu Jun 26th, 2008 |
| Location: | |
| Posts: | 6 |
| Mana: | |
|
Posted: Thu Jun 26th, 2008 10:28 pm |
|
| is that after or before vosa pass the use of an open pit for testing 3 wheelers ?
|
tester-ed
Member
| Joined: | Sun Nov 18th, 2007 |
| Location: | |
| Posts: | 8 |
| Mana: | |
|
Posted: Tue Nov 20th, 2007 07:26 pm |
|
KevG wrote: Its not a wind up!
We will all be getting cameras.
The "Cameras" are like the type used to inspect the inside of jet engines and the ones that Doctors use in keyhole surgery, They will be to let us see behind undertrays etc.
They will not be linked to VOSA HQ
Kev
If we had these camera's, endascopes i think they are called then the test would be longer surely because with these camera's should we then be checking all the brake lines that run over tanks and checking all wheel nuts present behind hub caps etc this would be a night mare, or am i wrong?
|
KevG
Super Moderator
|
Posted: Tue Nov 20th, 2007 05:22 pm |
|
Its not a wind up!
We will all be getting cameras.
The "Cameras" are like the type used to inspect the inside of jet engines and the ones that Doctors use in keyhole surgery, They will be to let us see behind undertrays etc.
They will not be linked to VOSA HQ
Kev
|
volksjim
Member
| Joined: | Sun Nov 18th, 2007 |
| Location: | |
| Posts: | 104 |
| Mana: | |
|
Posted: Mon Nov 19th, 2007 09:01 pm |
|
defo a wind up..but had a cam on me for the last 8 years at the station i work in"been testing 20 years" i have no probs with it if anything i can use it as proof to vosa that correct procedures are being followed
|
martins
Administrator
|
Posted: Tue Aug 14th, 2007 07:16 am |
|
| Talking about video cameras in MOT bays, keep an eye on the 'Car Owner's Guide' page of the MOT Testing website. Should go live later this week; all (constructive) comments gratefully received.
|
motmac
Member
|
Posted: Tue Aug 14th, 2007 12:45 am |
|
motorwise wrote: don't worry it's only for youtube in case someone falls over or gets crushed by the ramp
|
motorwise
Member
|
Posted: Thu Aug 9th, 2007 11:57 pm |
|
| don't worry it's only for youtube in case someone falls over or gets crushed by the ramp
|
KevG
Super Moderator
|
Posted: Thu Apr 26th, 2007 07:36 pm |
|
Having our Cameras fitted on Friday.
Only kidding
Kev
|
swift_gti_jase2
Member
| Joined: | Mon Jan 15th, 2007 |
| Location: | |
| Posts: | 2 |
| Mana: | |
|
Posted: Mon Feb 12th, 2007 10:09 pm |
|
remember me if it happens 
|
KevG
Super Moderator
|
Posted: Sun Feb 11th, 2007 05:35 pm |
|
| Sounds like a wind up to me!
|
motmac
Member
|
Posted: Mon Jan 15th, 2007 10:41 pm |
|
swift_gti_jase2 wrote: hi all, been chatting with a BT tech guy and so he says....... BT and the VOSA gang are getting together and are going to be putting cameras up over the MOT bay, weather its for still's or streaming feed i dont know , maybe its for big-brother?
any1 else heard this?
whats your thoughts?
well i certainly havent,sounds like a wind up to me 
that would take some swallowing!!
|
swift_gti_jase2
Member
| Joined: | Mon Jan 15th, 2007 |
| Location: | |
| Posts: | 2 |
| Mana: | |
|
Posted: Mon Jan 15th, 2007 10:04 pm |
|
hi all, been chatting with a BT tech guy and so he says....... BT and the VOSA gang are getting together and are going to be putting cameras up over the MOT bay, weather its for still's or streaming feed i dont know , maybe its for big-brother?
any1 else heard this?
whats your thoughts?
|
Current time is 01:36 pm | |
|
