stubbs22 wrote: Thanks for reply,
the problem is that the wire would run down inside the door,is it a mot testers job to strip light down to find the fault or would they just look and see its not working and fail it!
Tell the tester at the start of the test that you have had the door replaced, and that the high level brake lamp has not been re-wired in.
Here's the manual extract.....
Additional stop lamps
Any additional stop lamps fitted and connected must be tested. Where extra lamps are fitted and there is doubt as to whether they are connected, the benefit of this doubt should be given to the presenter
Last edited on Tue Jan 22nd, 2008 05:12 pm by Stealth
|