| Author | Post |
|---|
Stealth
Member
| Joined: | Wed Oct 31st, 2007 |
| Location: | |
| Posts: | 132 |
| Mana: |   |
|
Posted: Sun Mar 30th, 2008 04:21 pm |
|
Mo wrote: Thank's for your reasuring reply. Sorry to be a pain but ref my rear tyre,the tread is quite worn but only in the centre of the tyre, the rest is good. Could you possibly advise on tyre wear?
Cheers,
Mo
There you go - read the manual
http://www.motuk.co.uk/mcmanual_410.htm
|
Mo
Member
| Joined: | Fri Mar 28th, 2008 |
| Location: | |
| Posts: | 3 |
| Mana: | |
|
Posted: Sun Mar 30th, 2008 12:15 pm |
|
Thank's for your reasuring reply. Sorry to be a pain but ref my rear tyre,the tread is quite worn but only in the centre of the tyre, the rest is good. Could you possibly advise on tyre wear?
Cheers,
Mo
|
Mo
Member
| Joined: | Fri Mar 28th, 2008 |
| Location: | |
| Posts: | 3 |
| Mana: | |
|
Posted: Sun Mar 30th, 2008 12:11 pm |
|
Hi,
I have an aftermarket can fitted ....one with a removeable baffle which I cannot seem to remove but I'm not too worried about that. It is not excessively noisey (just right; to me!) obviously removing the C.A.T increases noise a little.
Cheers, Mo
|
big..E.
Trade Member
| Joined: | Wed Jan 30th, 2008 |
| Location: | |
| Posts: | 282 |
| Mana: |  |
|
Posted: Sat Mar 29th, 2008 08:44 pm |
|
| not a bike tester myself but does noise come into it?????
|
KevG
Super Moderator
|
Posted: Fri Mar 28th, 2008 08:10 pm |
|
Hi MO
No problems with this at all. Cat not required.
Kev
|
Mo
Member
| Joined: | Fri Mar 28th, 2008 |
| Location: | |
| Posts: | 3 |
| Mana: | |
|
Posted: Fri Mar 28th, 2008 02:49 pm |
|
| Not sure I'm driving this forum properly as I just joined. Wanted to know if my morcycle will fail it's next M.O.T due to the fact I have removed the C.A.T to put a straight through Y piece in it's place?
|
Current time is 05:01 pm | |
|
